null

Lexus LX450 (95'-97')

  • Fusible Link for 80 Series Land Cruiser (FLK-1)

    Fusible Link for 80 Series Land Cruiser

    Replacement fusible link for all US 3FE and 1FZ 80 Series Land Cruisers. Recommended to get two, one to replace what you have and one for a spare. This is an OEM original part. Part no. 90982-08264 Made in Japan

    $21.85
  • Toyota Magnetic Differential Plug Kit (DPK-1)

    OEM Magnetic Differential Plug Kit

    NOTE: Does not fit the 90341-24014 diff plug found on the front diff on most 4WD IFS Toyota trucks. These OEM Magnetic Differential Plugs fit nearly all Toyota 2WD and 4WD trucks and SUVs with M18 threads (4WD IFS trucks are the exception). These are...

    $11.45
  • OEM Panel Trim Retainer- Dark Gray (PTR-2)

    OEM Panel Trim Retainer- Dark Gray

    You know when you are removing plastic trim panels from your Toyota or Lexus vehicle and those stupid little retainer clips ALWAYS break? Do you know why they break? It turns out you touched them. A decade or two of time and heat cycles will do that to...

    $4.18
  • 60/80 Series Hood Liner Clips (HLC-1) 90467-09014

    60/80 Series Hood Liner Clips

    These hood clips fits Land Cruiser models 1981-1997 (60/62/80). The 80 Series uses 12 in total. Price sold each. Part no: 90467-09014 MADE in JAPAN

    $1.60
  • 80 Series 1FZ Complete Belt Kit (TDB-3KIT)

    80 Series 1FZ Complete Belt Kit

    This is the complete OEM engine drive belt kit for the 1FZ engine consisting of (1) A/C belt and (2) alternator belts. If you are looking to over-drive your alternator you can upgrade to 15% Overdrive Machined Alt Pulley, 1FZ. Contains:•...

    $25.00
  • 80 Series 1FZ Oil Pump Leak Kit

    80 Series 1FZ Oil Pump Leak Kit

    NOTE: JIS bits no longer included since we've had issues getting a consistent qty Notice that dirty, oily, goopy mess all over the front of your 1FZ block? Its one, or more, of three typical things: leaking distributor o-ring, leaking front engine seal...

    $34.00
  • Gates Green Stripe heater hose 5/8" by the foot (GAT-58)

    Gates Green Stripe heater hose 5/8" by the foot

    Although its not OEM its the next best thing to replace the direct runs of heater hose in your truck. Note: the quantity selected will be in a single length of hose Features:• Green Stripe® construction provides best cost-per-mile...

    $3.25
  • OEM 3/4" Constant Torque Spring Clamp (CTC-34)

    OEM Constant Torque Spring Clamp for 5/8" ID Heater Hose

    On the 80 Series 3FE and 1FZ engines, all of the heater hoses are secured by a spring steel clamp that is tightened at the factory using a cotter pin and tool to lock it into place. These are intended as single use clamps. If you still have these clamps...

    $4.60
  • OEM Magnetic Transfer or Trans Case Drain Plug Kit (DPK-2)

    OEM Magnetic Transfer or Trans Case Drain Plug Kit

    These OEM Magnetic Transfer Case Plugs fit nearly all Toyota 2WD and 4WD trucks and SUVs (does not fit the FJ Cruiser auto). These are the hex plugs that replace the easily damaged drain plugs. The originals can be easily damaged from a tool rounding out...

    $11.90
  • 1FZ-FE Engine Little Hose Kit (SHK-1)

    1FZ-FE Engine Little Hose Kit

    These are the four small coolant bypass hoses (throttle body) needed for the 80 Series 1FZ. The ones right about the starter are probably the most difficult to change but are often overlooked. OEM clamps are available as an option. If you are doing this...

    $50.00 - $78.50
  • OEM 25mm Spring and Bolt Clamp for 3/4" hoses (SBC-25)

    OEM 25mm Spring and Bolt Clamp for 5/8" ID hoses

    On the 80 Series 3FE and 1FZ engines, all of the heater hoses are secured by a spring steel clamp that is tightened at the factory using a cotter pin and tool to lock it into place. These are intended as single use clamps. If you still have these clamps...

    $0.50
  • 80 Series 1FZ PCV Valve Kit (PCV-1KIT)

    80 Series 1FZ PCV Valve Kit

    This is the complete PCV valve kit for your 80 Series Land Cruiser with the 1FZ motor. This kit includes:• (1) Valve cover vent hose #1 (12261-66021)• (2) Clips (small) for hose #1 (90467-14001)• (1) Valve cover vent hose #2...

    $74.75
  • 1FZ-FE Radiator Hose Kit (RHK-1)

    1FZ-FE Radiator Hose Kit

    All three radiator hoses for the 1FZ-FE motor. If you don't destroy your old hoses consider hanging on to them for spares. Includes:• (1) 16571-66030 radiator hose• (1) 16572-66021 radiator hose• (1) 16573-66010 radiator hose Clamps...

    $81.20
  • 80 Series Inner Axle Seal Offset Driver (ASD-1)

    80 Series Inner Axle Seal Offset Driver

    NOTE: Anodized (blue) is currently on hold. All tools shipped will be black anodized for now. There is one thing that comes as a right of passage in owning an 80 Series and that is the rebuilding of our front knuckles. Generally speaking its not...

    $34.00
  • OEM Vacuum Hose Kit- 3.5mm (VHK-1)

    OEM Vacuum Hose Kit- 3.5mm

    This kit contains SIX lengths of 3.5mm OEM vacuum hose. Each is 2/3 of a meter per package. This covers the majority of the vacuum tubing needed for the 1FZ motor but does NOT have the larger vacuum hose used on the VSV or Charcoal Canister. This is the...

    $16.30
  • OEM Radiator Hose Clamp- med (BRZ-50)

    OEM Radiator Hose Clamp- med

    This is one size of two OEM constant torque hose clamps which fits the 3FE, 1FZ, 2UZ and many other Toyota radiator hoses. Both the 80 3FE and 1FZ require (4) and the 62 Series 3FE needs (2) of these clamps. These clamps are 50mm ID and should be used...

    $8.35
  • 80 Series Wheel Stud- Rear (STD-2)

    60/80 Series Wheel Stud- Rear

    OEM rear wheel stud for all 60 and 80 Series Land Cruisers. Part no: 90942-02052 Also fits:• 1981-1997 Toyota Land Cruiser• 1984-2000 Toyota 4Runner• 1979-1995 Toyota Pickup• 2001-2007 Toyota Sequoia• 1993-1998 Toyota...

    $6.75
  • Oil Drain Bolt Gasket (ODG-10)

    Oil Drain Bolt Gasket

    There are your standard Toyota drain plug gaskets that should be replaced with every oil change. Part no: 90430-12031 Fits: Toyota FJ Cruiser 2007-2014 Toyota Land Cruiser 1991 - 2020 Toyota Pickup 1990 - 1995 Toyota Sequoia 2001-2020 Toyota...

    $11.80
  • 80 Series Useless Cubby Insert-base (UCI-1)

    80 Series Useless Cubby Insert-base

    NOTE: Orders up to AUG. 30 should be shipped. After that date are in production Have an FZJ80 Land Cruiser? You know that useless cubby that sits right above the radio? Well you have two options: OEM cupholder or a slot to hide your tin of Altoids. The...

    $75.50
  • Wits' End Diagnostic Port Jumper Wire

    Diagnostic Port Jumper Wire for OBD equipped vehicles

    NOTE: This is a general use stand-in for the OEM SST 09843-18020 used for setting ignition timing, checking ABS, transmission and airbag diagnostics. NOTE: THIS IS FOR THE UNDERHOOD DIAGNOSTICS PORT NOT THE OBD PORT UNDER THE DASH!!! I know what you...

    $9.00
  • 80 Series Nut Hugger- Toyota Solid Axle Knuckle (SAK-1)

    80 Series Nut Hugger- Toyota Solid Axle Knuckle

    NOTE: These are NOT for the 60 Ssries Land Cruiser nor Toyota 4WD Mini Trucks. For those go here>> NOTE: If your knuckle hardware is properly torqued, and not needing a rebuild, there is NO reason to take it apart just to use these. Keep your...

    $33.00
  • 80 Series 1FZ Curved Heater Hose Kit (CHH-1)

    80 Series 1FZ Curved Heater Hose Kit

    These are the four OEM formed heater hoses used on the 1FZ motor on 80 Series Land Cruisers. These are all found along the firewall by the heater control valve. There is a fourth 1/2" 90deg heater hose that is no longer available from Toyota but an OEM...

    $115.30
  • Gates Green Stripe heater hose 1/2" by the foot (GAT-12)

    Gates Green Stripe heater hose 1/2" by the foot

    Although its not OEM its the next best thing to replace the direct runs of heater hose in your truck. Note: the quantity selected will be in a single length of hose Features:• Green Stripe® construction provides best cost-per-mile...

    $3.00
  • 80 Series Front Axle Reference Poster- 18"x27", Version 3 (REF-1)

    80 Series Front Axle Reference Poster- 18"x27", Version 3

    Version 3.0 This a digital printed and laminated poster of the complete breakdown of the 80 Series Land Cruiser front axle. The style of the part breakout will feel familiar to the Factory Service Manual except that there is far more information listed...

    $26.00
  • Toyota Radiator Cap (TRC-1)

    OEM Radiator Cap

    Toyota OEM radiator cap for your 80 Series Land Cruiser. These can fail more often that people realize. There are to seals that can tear and/or swell bad enough to affect their function. Part no. 16401-54750 Made in Japan

    $16.80
  • Land Cruiser Shock Bolt and Washer (SBW-1)

    Land Cruiser Shock Bolt and Washer

    These are the shock bolts that are used in several models of Land Cruiser. These tend to not only rust out but they also tend to get damaged during off-roading. Part no: 90119-12088• 60/62 series: rear upper and lower, front lowers (6 needed)•...

    $3.80
  • OEM 1FZ-FE Engine Name Plate (ENP-1)

    OEM 1FZ-FE Engine Name Plate

    Used only on the very early 1FZ production engines from 8-92 to 5-93. From that point on the emblem was not installed. But...you could certainly add one. If you originally had one either it was added by somebody or the engine (at least the valve cover)...

    $4.99
  • 80 Series Land Cruiser 1FZ Fuel Filter (TFF-1)

    80 Series 1FZ Fuel Filter

    OEM fuel filter for the 93-97 Land Cruiser and Lexus LX450 with the 1FZ. OEM part # 23300-69045 Other fuel filters:• 100 Series 2UZ Fuel Filter• 2F Fuel Filter for 1980 and later Land Cruisers• 62 Series 3FE Fuel Filter• 80 Series...

    $44.50
  • 80 Series OEM Lower Knuckle Stud and Hardware Kit (KAN-3)

    80 Series OEM Lower Knuckle Stud and Hardware Kit

    This kit is the complete knuckle stud and hardware kit for one side of your 80 Series Land Cruiser. Also included is the E12 Torx socket needed to install the new style OEM knuckle studs. Includes:• (4) Toyota OEM Lower Knuckle studs• (4)...

    $46.00
  • 80 Series Windshield Washer Nozzle Upgrade (WNU-1)

    80 Series Windshield Washer Nozzle Upgrade

    With this kit you can convert the 2-sprayer nozzle from your 80 Series Land Cruiser and convert it to the 3-sprayer nozzle. This gives the windshield more covered and replaces the often times clogged sprayers. Includes the two clips needed to remove to...

    $47.10
  • OEM Radiator Hose Clamp- large

    OEM Radiator Hose Clamp- large

    This is one size of two OEM constant torque hose clamps which fits the 3FE, 1FZ and 2UZ radiator hoses. These clamps are 54mm ID and should be used for the larger diameter of the hose ends. Part no: 90467-43002 MADE in JAPAN

    $7.10
  • 80 Series 1FZ Thermostat and Bypass O-Ring Kit (TSK-1)

    80 Series 1FZ Thermostat and Bypass O-Ring Kit

    OEM thermostat and o-ring for the 80 Series Land Cruiser with the 1FZ motor. Also includes all three o-rings fof the thermostat bypass. Servicing the bypass o-rings is just one of those "while I'm there" when doing the thermostat. If you also want to...

    $57.70
  • 80 Series Plastic Step Nut- Brown Extended (PSN-4)

    80 Series Plastic Step Nut- Brown Extended

    NOTE: Sold individually Extended length replacement step nut for the second row step or the driver's dead pedal. These are ideal for those that apply Dynamat or heat barrier on the floor of their truck. Extended lengths are NOT available from Toyota...

    $19.50
  • 80 Series 1FZ Valve Cover Leak Kit (VCK-1)

    80 Series 1FZ Valve Cover Leak Kit

    This is the Valve Cover Leak Kit for the 80 Series Land Cruiser with the 1FZ motor. Other than the Oil Leak Kit, this is the next most common source of engine leaks. In order to complete this task you will need to remove the throttle body so a gasket is...

    $107.60
  • 80/100 Series Fan Clutch Hardware (BFC-2)

    80/100 Series Fan Clutch Hardware

    Complete hardware kit for mounting the fan to the fan clutch and then for the fan clutch to the the water pump/pulley. This kit is perfect as a spares kit or just to replace the old and mangled flanged nuts that are currently holding your fan clutch and...

    $4.00
  • Late 80 Series Toyota Switch Blank (TSB-1)

    Late 80 Series Toyota Switch Blank

    The OEM Toyota snap-in switch blanks are used to fill in the blanks when a switch isn't needed on the Useless Astray Switchplate- Toyota Switches. The blanks are black and simply pop into place. Part no: 55539-32010-C0 Options:• Carling Switch...

    $4.75
  • 80Series Land Cruiser OEM Front Caliper Bolts (FCB-1)

    OEM Front Caliper Bolt Kit

    These are your standard issue Toyota OEM caliper bolts and washers for the front calipers of your 80 Series Land Cruiser. Not a big deal really. But if you are on the IH8MUD forum long enough you will notice a trend; these bolts tend to go missing and...

    $10.50
  • OEM Washable Cyclonic Air Filter (AIR-1)

    OEM Washable Cyclonic Air Filter

    OEM washable air filter that works for the 80 Series 3FE and 1FZ but also the heavy duty 7x series and diesel motors with the cyclonic air filter housing. Yes, the filter is washable and reusable. Part no: 17801-61030 Made in JAPAN

    $27.90
  • Toyota FIPG 103 Adhesive (TOY-103) 00295-00103

    Toyota FIPG 103 Adhesive

    NOTE: As of 2/15/24 these have been trickling in nationally. Orders will go out as qtys arrive. TOYOTA OEM specified adhesive for the oil pan and camshaft housing. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers,...

    $18.00
  • 80 Series Floppy Mirror Fix (FMF-1)

    80 Series Floppy Mirror Fix

    NOTE: WILL NOT work on the 100 Series. Anyone with an 80 Series Land Cruiser will, one day, eventually have to deal with the Floppy Mirror Syndrome (FMS). Now this is not to be mistake with Shaky Mirror Syndrome (SMS). FMS needs something a little more...

    $26.00
  • 80 Series Heater Hose Clamp- 3FE/1FZ (HHC-1)

    80 Series Heater Hose Clamp- 3FE/1FZ, 1/2" ID Hose

    OEM heater hose clamp found on 80 Series Land Cruisers with 3FE and 1FZ engines. This clamp ONLY works on the 1/2" hoses and will not fit the 5/8" hoses. Specifically this clamp is used on the heater hoses used on the REAR heater.  Part no:...

    $3.20
  • Fuel Injector Connector Housing (FIC-1)

    Fuel Injector Connector Housing

    Original Toyota Sumitomo 2 Way TS Plug Housing for Denso Injectors. Connector ONLY. Terminals not included. These connectors are ALWAYS brittle and tend to break after 20+ years on our trucks. They seem to want to break at the most inopportune time. You...

    $10.99
  • 80 Series Plastic Step Nut- Brown Standard (PSN-3)

    80 Series Plastic Step Nut- Brown Standard

    NOTE: Sold individually Standard length replacement step nuts for the second row step or the driver's dead pedal. If you prefer OEM these are still available from Toyota. Includes:(1) Standard length step nut MADE in USA

    $19.50
  • 80 Series Instrument Panel Light (IPL-1)

    Combination Meter Light- 80 and 100 Series

    Have a light out on your dash?  Here is your Combination Meter Bulb NO.1, 12V 1.4W, w/socket. In total your truck takes about 11 but these are sold individually. Part no: 83120-60020 NOTE: These are NOT for the gear position lights Also...

    $6.70
  • 80 Series Swaybar Bushing Kit (SBB-1KIT)

    80 Series Swaybar Bushing Kit- US Models

    This the 80 Series Land Cruiser Swaybar bushing kit. These OEM bushings will handle the frame mounted "D" brackets for the swaybar and also the rubber ends of the swaybar. This kit is only for the FZJ-80 trucks. Will not work for 90-91 FJ80s or HDJ80s...

    $59.60
  • 80 Series OEM Rubber Exhaust Bushing (REB-1)

    80 Series OEM Rubber Exhaust Bushing Kit

    Note: Price INCLUDES the four nuts required Trying to track down that annoying clunk when you go over a speed bump or going up a driveway? Have you checked your exhaust hangers? Your 80 Series Land Cruiser has three of them and their purpose is to...

    $30.45