null

Lexus LX450 (95'-97')

  • OEM Oil Filter-Medium 90915-40002 (OIL-2) OEM Oil Filter-Medium 90915-40002 (OIL-2)

    OEM Oil Filter-Medium 90915-40002

    Medium Toyota oil filter for use on the 1FZ and 2UZ Land Cruiser engines (and plenty others). This is a slightly larger version of the smaller OEM Oil Filter-Small. If you want the larger made in Japan canisters you could try getting 15601-44011 but good...

    $13.80
    Add to Cart
  • 80 Series Fuel Tank Vent Hose and Clamps (FTH-1) 80 Series Fuel Tank Vent Hose and Clamps (FTH-1)

    80 Series Fuel Tank Vent Hose and Clamps

    If you have an 80 Series Land Cruiser then you already know the familiar smell of fuel vapor when the charcoal canister fails. But did you know that there is another source of the fuel vapor smell on our aging trucks? Turns out there is a secondary fuel...

    $17.25
    Add to Cart
  • 80 Series Antenna Mast and Bezel Kit (AMB-1KIT) 80 Series Antenna Mast and Bezel Kit (AMB-1KIT)

    80 Series Antenna Mast and Bezel Kit, 96-97

    This is the kit for the 96-97 LX450 and the 97 40th Anniversary Land Cruisers. Earlier 80 Series antennas uses a mast that is no longer available from Toyota but can be found in the aftermarket world. If an OEM replacement is found I will update here...

    $104.80
    Add to Cart
  • OEM Wire Harness Tape (WHT-1) OEM Wire Harness Tape (WHT-1)

    OEM Wire Harness Tape

    This is the OEM wire harness tape used on the Toyota Land Cruiser. This is the ideal wrap tape for under the hood. For harness tape that runs along the inside of body panels its preferred to use TESSA tape for it helps reduce noise during vibration...

    $35.40
    Add to Cart
  • 90915-YZZD3 OEM Oil Filter (OIL-1) 90915-YZZD3 OEM Oil Filter (OIL-1)

    OEM Oil Filter-Small

    Small Toyota oil filter for use on the 1FZ and 2UZ Land Cruiser engines (and plenty others). If you want the larger made in Japan canisters you could try getting 15601-44011. Part no. 90915-YZZD3 MADE in THAILAND

    $5.10
    Add to Cart
  • Battery Hold-Down Nuts Battery Hold-Down Nuts (BHD-2)

    Battery Hold-Down Nuts

    This is the OEM battery hold-down nut used on the battery tray hardware. Yes there is supposed to be TWO nuts PER clamping bolt. Part no: 90080-18071 sold separately MADE in JAPAN

    $1.50
    Add to Cart
  • 80 Series Battery Hold Down Hardware Set (BHD-1SET) 80 Series Battery Hold Down Hardware Set (BHD-1SET)

    80 Series Battery Hold Down Hardware Set

    This is the complete hardware set for all 80 series Land Cruisers RHD or LHD and passenger or driver side battery mounting.  If you have a battery set plate bar that is rusted to crap or have missing nuts for the clamp bolts, this will get you...

    $46.60
    Add to Cart
  • 80 Series Visor Clip Cap (VCC-1) 80 Series Visor Clip Cap (VCC-1)

    80 Series Visor Clip Cap Pair

    This product ONLY makes sense if you have replaced your saggy/torn/limp visors with the upgraded Rosen aircraft visors. Once installed the stow clip becomes useless and is an eye sore. This cleans up the look. If you prefer a less expensive 3D printed...

    $35.00
    Add to Cart