null

62 Series Land Cruiser

  • Toyota Magnetic Differential Plug Kit (DPK-1)

    OEM Magnetic Differential Plug Kit

    NOTE: Does not fit the 90341-24014 diff plug found on the front diff on most 4WD IFS Toyota trucks. These OEM Magnetic Differential Plugs fit nearly all Toyota 2WD and 4WD trucks and SUVs with M18 threads (4WD IFS trucks are the exception). These are...

    $11.45
  • 60/80 Series Hood Liner Clips (HLC-1) 90467-09014

    60/80 Series Hood Liner Clips

    These hood clips fits Land Cruiser models 1981-1997 (60/62/80). The 80 Series uses 12 in total. Price sold each. Part no: 90467-09014 MADE in JAPAN

    $1.60
  • Gates Green Stripe heater hose 5/8" by the foot (GAT-58)

    Gates Green Stripe heater hose 5/8" by the foot

    Although its not OEM its the next best thing to replace the direct runs of heater hose in your truck. Note: the quantity selected will be in a single length of hose Features:• Green Stripe® construction provides best cost-per-mile...

    $3.25
  • OEM 3/4" Constant Torque Spring Clamp (CTC-34)

    OEM Constant Torque Spring Clamp for 5/8" ID Heater Hose

    On the 80 Series 3FE and 1FZ engines, all of the heater hoses are secured by a spring steel clamp that is tightened at the factory using a cotter pin and tool to lock it into place. These are intended as single use clamps. If you still have these clamps...

    $4.60
  • OEM Magnetic Transfer or Trans Case Drain Plug Kit (DPK-2)

    OEM Magnetic Transfer or Trans Case Drain Plug Kit

    These OEM Magnetic Transfer Case Plugs fit nearly all Toyota 2WD and 4WD trucks and SUVs (does not fit the FJ Cruiser auto). These are the hex plugs that replace the easily damaged drain plugs. The originals can be easily damaged from a tool rounding out...

    $11.90
  • OEM 25mm Spring and Bolt Clamp for 3/4" hoses (SBC-25)

    OEM 25mm Spring and Bolt Clamp for 5/8" ID hoses

    On the 80 Series 3FE and 1FZ engines, all of the heater hoses are secured by a spring steel clamp that is tightened at the factory using a cotter pin and tool to lock it into place. These are intended as single use clamps. If you still have these clamps...

    $0.50
  • OEM Radiator Hose Clamp- med (BRZ-50)

    OEM Radiator Hose Clamp- med

    This is one size of two OEM constant torque hose clamps which fits the 3FE, 1FZ, 2UZ and many other Toyota radiator hoses. Both the 80 3FE and 1FZ require (4) and the 62 Series 3FE needs (2) of these clamps. These clamps are 50mm ID and should be used...

    $8.35
  • 80 Series Wheel Stud- Rear (STD-2)

    60/80 Series Wheel Stud- Rear

    OEM rear wheel stud for all 60 and 80 Series Land Cruisers. Part no: 90942-02052 Also fits:• 1981-1997 Toyota Land Cruiser• 1984-2000 Toyota 4Runner• 1979-1995 Toyota Pickup• 2001-2007 Toyota Sequoia• 1993-1998 Toyota...

    $6.75
  • Oil Drain Bolt Gasket (ODG-10)

    Oil Drain Bolt Gasket

    There are your standard Toyota drain plug gaskets that should be replaced with every oil change. Part no: 90430-12031 Fits: Toyota FJ Cruiser 2007-2014 Toyota Land Cruiser 1991 - 2020 Toyota Pickup 1990 - 1995 Toyota Sequoia 2001-2020 Toyota...

    $11.80
  • Wits' End Diagnostic Port Jumper Wire

    Diagnostic Port Jumper Wire for OBD equipped vehicles

    NOTE: This is a general use stand-in for the OEM SST 09843-18020 used for setting ignition timing, checking ABS, transmission and airbag diagnostics. NOTE: THIS IS FOR THE UNDERHOOD DIAGNOSTICS PORT NOT THE OBD PORT UNDER THE DASH!!! I know what you...

    $9.00
  • Gates Green Stripe heater hose 1/2" by the foot (GAT-12)

    Gates Green Stripe heater hose 1/2" by the foot

    Although its not OEM its the next best thing to replace the direct runs of heater hose in your truck. Note: the quantity selected will be in a single length of hose Features:• Green Stripe® construction provides best cost-per-mile...

    $3.00
  • Land Cruiser Shock Bolt and Washer (SBW-1)

    Land Cruiser Shock Bolt and Washer

    These are the shock bolts that are used in several models of Land Cruiser. These tend to not only rust out but they also tend to get damaged during off-roading. Part no: 90119-12088• 60/62 series: rear upper and lower, front lowers (6 needed)•...

    $3.80
  • OEM Radiator Hose Clamp- large

    OEM Radiator Hose Clamp- large

    This is one size of two OEM constant torque hose clamps which fits the 3FE, 1FZ and 2UZ radiator hoses. These clamps are 54mm ID and should be used for the larger diameter of the hose ends. Part no: 90467-43002 MADE in JAPAN

    $7.10
  • Toyota FIPG 103 Adhesive (TOY-103) 00295-00103

    Toyota FIPG 103 Adhesive

    NOTE: As of 2/15/24 these have been trickling in nationally. Orders will go out as qtys arrive. TOYOTA OEM specified adhesive for the oil pan and camshaft housing. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers,...

    $18.00
  • Fuel Injector Connector Housing (FIC-1)

    Fuel Injector Connector Housing

    Original Toyota Sumitomo 2 Way TS Plug Housing for Denso Injectors. Connector ONLY. Terminals not included. These connectors are ALWAYS brittle and tend to break after 20+ years on our trucks. They seem to want to break at the most inopportune time. You...

    $10.99
  • 10-pack Steel Diff Plug washers (SDP-1)

    10-pack Steel Diff Plug washers

    OEM Toyota Drain Plug Gasket- steel for differentials. These are one-time use replacement washers used in OEM Magnetic Differential Plug Kit. Part no: 12157-10010 10-PK Made in JAPAN

    $17.80
  • 80 Series Driveshaft Hardware Kit-Rear 11mm (DCS-3)

    80 Series Driveshaft Hardware Kit-Rear 11mm

    This is the complete driveshaft hardware for most Land Cruisers on the road. This kit replaces the washer/nut on the transfer case side and the bolt/washer/nut on the differential side. The 11mm rear driveshaft hardware fits:• All FJ60 Series Land...

    $32.70
  • Connector Pin Tool-basic (PST-2)

    Connector Pin Tool-basic

    If you own any Toyota long enough you will eventually need to either modify or repair an electrical connector. This can be daunting because it seems everyone is already having a hard enough time building up the courage to even commit to "cutting the...

    $43.00
  • 10-pack Aluminum Transfer Plug washers (ATP-2)

    10-pack Aluminum Transfer Plug washers

    OEM Toyota Drain Plug Gasket- aluminum for transfer cases and transmissions. These are one-time use replacement washers used in OEM Magnetic Transfer or Trans Case Drain Plug Kit Part no: 90430-A0003 10-PK Made in USA

    $18.35
  • OEM Automatic Transmission Drain Plug and Washer (ADP-1)

    OEM Automatic Transmission Drain Plug and Washer

    OEM replacement drain plug and washer for nearly all Automatic Transmission Toyota cars and trucks. Oddly enough this doesn't fit PRE-95 Land Cruisers. The main reason for changing this plug out with every drain and refill is to prevent galling the...

    $6.80
  • Emergency Brake Line Plug- M10 x 1.0 (BLP-1)

    Emergency Brake Line Plug- M10 x 1.0

    EMERGENCY USE ONLY!!!   Ever been on a trail or water crossing and had a branch or rock smash a brake hard line or literally have the brake hose ripped in half? I've had the displeasure of dealing with it twice in 35 years; once used a pair of...

    $25.00
  • OEM Steel Wheel Chock (SWC-1)

    OEM Steel Wheel Chock

    It should go without saying that ALL vehicles should have a pair of wheel chocks for safety. Every time you are repairing your truck or replacing a tire or anything that requires you to be under it, a wheel chock is a must. If you have a pair of wheel...

    $26.70
  • Wits' End patch (WEP-1)

    Wits' End patch

    The Wits' End more-al patch. Add one to your collection or start a collection today. More-al patches are fun as you display your interest to your peers and draw on that common bond of TEQ in the Land Cruiser community. Oh and no cheap Chinese junk,...

    $9.00
  • Lithium Soap Based Glycol Grease

    Lithium Soap Based Glycol Grease

    Ever open up your Factory Service Manual, and while thumbing thru the brake section, and notice the words "Lithium Soap Based Glycol Grease"? Well THIS is that grease.  Think of it this way, if a rubber piece touches ANYTHING metal, use this grease...

    $9.75
  • 62 and 80 Series Land Cruiser Center Console Liner- Pocket (CCLP-1)

    62 and 80 Series Land Cruiser Center Console Liner- Pocket

    NOTE: Liners are no longer screen printed. Image with logo is for display purposes only. When you look at the front center console of your 62 or 80 Series Land Cruiser, do you ever feel as though there should be some kind of mat to prevent all of your...

    $4.50
  • 11mm Driveshaft Bolt- Spare (DCS-11)

    11mm Driveshaft Bolt- Spare

    Individual OEM 11mm driveshaft bolt. Although you can get an entire 10mm driveshaft hardware or 11mm driveshaft hardware kit, sometimes it helps to have a few 11mm bolts as a spare.

    $1.50
  • 60/62 Series Front Axle Reference Poster- 18"x27" (REF-2)

    60/62 Series Front Axle Reference Poster- 18"x27"

    This a digitally printed and laminated poster of the complete breakdown of the 60/62 Series Land Cruiser front axle. The style of the part breakout will feel familiar to the Factory Service Manual except that there is far more information listed such as...

    $27.00
  • 60 Series Windshield Wiper Motor Grommet (WMG-1)

    60 Series Windshield Wiper Motor Grommet

    If you have a 60 or 62 Series Land Cruiser and you noticed that your windshield wiper arms are super sloppy and you want to 'firm' them up, well this grommet gets you those anti-flaccid wiper arms you crave! Specifically this replaces the nylon grommet...

    $20.00
  • OEM Oil Filter-Medium 90915-40002 (OIL-2)

    OEM Oil Filter-Medium 90915-40002

    Medium Toyota oil filter for use on the 1FZ and 2UZ Land Cruiser engines (and plenty others). This is a slightly larger version of the smaller OEM Oil Filter-Small. If you want the larger made in Japan canisters you could try getting 15601-44011 but good...

    $13.90
  • Wheel Stud Tool- 12mm Studs (WST-1)

    Wheel Stud Tool- 12mm Studs

    This tool all started because of this thread: RTH: stuck in Primm, wheel lugs sheered off All 6 wheel studs snapped while driving on the frwy coming home from Las Vegas at 60MPH. I was stuck with no way to replace the broken studs so I had to be towed...

    $65.00
  • Keychain- Model 03 (KEY-3)

    Keychain- Model 03

    Keychain model 03. This is the perfect gift for the person who wants to pay homage to the EGR on the 62 Series and early 3F 80 Series. What better way to show your affinity to the Land Cruiser motor of choice than with a CNC milled, anodized and laser...

    $22.50
  • Toyota FIPG 1281 Adhesive (TOY-1281)

    Toyota FIPG 1281 Adhesive

    TOYOTA OEM specified RED adhesive for the transmission pan. Formed-in-Place Transmission Gasket is a high-performance RTV silicone used as a formed-in-place transmission gasket to seal various flange and large clearance surfaces in order to prevent oil,...

    $26.70
  • Horn Contact Pin "Plate" (PIN-1)

    Horn Contact Pin "Plate"

    This OEM horn pin fits just about every Toyota on the road from 1974 til about 1990ish. The applications are too many to list. But if your horn uses this style of pin this is likely the one. The issue with the horn not working is very typically that this...

    $9.00
  • Door/Hood Plug (DHP-1)

    Door/Hood Plug

    This plug is used on a HUGE swath of Toyota vehicles as a hood and body drain port plug. On the 60s these are used in the pillars but are often time missing. If you notice water being trapped in the body or water on the floor of your 60 then its very...

    $2.30
  • Overflow Tank Cap Gasket- 60/62/80 Series (OCG-1)

    Overflow Tank Cap Gasket- 60/62/80 Series

    Every get really frustrated with your 25+ year old 60/62/80 Series Land Cruiser and the fact that the radiator overflow cap doesn't fit snugly onto the bottle because the gasket just plain wore out? Then you find out the only way to get a replacement...

    $6.90
  • Modified 54mm Hub Nut Tool (HUB-2)

    Modified 54mm Hub Nut Tool- V2

    This is a new 1/2" drive 54mm socket that has been CNC machined to add 3 notches for use on the full float rear wheel bearing nut.  This single tool can be used to loosen/torque the front and the rear axle wheel bearing nuts. The interior of the nut...

    $55.00
  • Generic Mirror Arm and Block- 60/62 Series (GMA-1)

    Generic Mirror Arm and Block- 60/62/105 Series

    Although the Generic Mirror Block has been available for over a year now and has been installed on many Land Cruisers, not everyone wants to glue a wedge onto the windshield. This is where the Generic Mirror Arm & Block comes in. These...

    $130.00
  •  The most hated hose clamp for 5/8" hose (POO-1) 87124-28030

    The most hated hose clamp for 5/8" hose

    Quite possibly THE most hated hose clamp in the Land Cruiser world. Personally the use of these clamps makes me ill but they have their place. Since I get requests for them every now and again it seemed time to just start stocking for those that REALLY...

    $4.35
  • 3FE Tune-Up Master Kit (TMK-3)

    3FE Tune-Up Master Kit

    Toyota Land Cruiser 80 Series (and MOSTLY 62 Series as noted) 3F-E Tune Up Parts and Tidbits based on the list put together, and with permission, by Jon Held on IH8MUD (6) 90919-01091 Spark PlugsCorrect electrode gap: 1.1 mm (0.043 in.) (1)...

    $314.10
  • Body Grease- Molykote 102 (BGM-102)

    Body Grease- Molykote 102

    This is the Toyota specific grease used in electrical motors on the Land Cruisers. Typical applications would be the windshield motors and the diff e-lock motors that commonly need to be rebuilt. One bottle is easily enough for two motor's worth of...

    $67.10
  • 62 and early 80 Series Land Cruiser Top Console Liner (CCTL-1)

    62 and early 80 Series Land Cruiser Top Console Liner

    NOTE: Liners are no longer screen printed. Image with logo is for display purposes only. When you look at the center console of your 62 or early FJ80 Land Cruiser, do you ever feel as though there should be some kind of mat to hide the ugly looking top...

    $9.00
  • Not My Land Cruiser patch (WEP-3)

    Not My Land Cruiser More-Al patch

    So uh...yeah. Not sure which side of the topic you fall but now you can have a patch to state the obvious. :D Oh and no cheap Chinese junk, these are made locally! Note: No, these will NOT get some fancy backer artwork, these are meant to display not...

    $12.00
  • Starter Rebuild Kit- 2F/3F-E Land Cruisers, 1.0Kw (SRK-1KIT)

    Starter Rebuild Kit- 2F/3F-E Land Cruisers, 1.0kW

    Land Cruiser starter rebuild kit covering 1981-8/1992 with the 1.0kW 2F/3F-E starters. This rebuild kit covers late FJ40/FJ60/FJ62/FJ80.   Includes: • (1) 28226-72010 • (1) 28226-72080 • (1) 28235-35080   MADE in...

    $72.90
  • Toyota OEM Brake Caliper Grease (BCG-1)

    Toyota OEM Brake Caliper Grease

    OEM Toyota disc brake grease that is used for grease the caliper pieces that see metal to metal contact. This would be on the faces or the brake pad shims and where the brake clips comes into contact with pad. For metal to rubber grease use Lithium Soap...

    $28.80
  • 60 Series Dome Light Lens (DLL-2)

    60 Series Dome Light Lens

    Dome light lens found on 80s and 90s Toyota Trucks and cars. Original is very likely either crumbling or very yellow or melted. Part no: 81241-20060 Fits:• Toyota 4Runner 1984-1995 • Toyota Land Cruiser 1981-1990 • Toyota Pickup 1984-1995...

    $9.50
  • 62 and early 80 Series Land Cruiser Underside Console Liner (CCTL-2)

    62 and early 80 Series Land Cruiser Underside Console Liner

    This liner came as a request and it turned out to be a good idea. Since there isn't a specific APU that fits the underside of the lid on the FJ62/FJ80 (early), there are still options to mount the APU-1 or APU-2. BUT when adding either panel you are left...

    $10.00