Quick view Details Wits' End 80 Series 1FZ Super Charger Belt- DAYCO MSRP: Now: $32.00 Add to Cart Compare Quick view Details Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock MSRP: Now: $135.99 Add to Cart Compare Quick view Details ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust MSRP: Now: $20.00 Add to Cart Compare Quick view Details ClampCo V-Band Clamp, 3.5in Turbo to Downpipe MSRP: Now: $22.00 Add to Cart Compare Quick view Details Wits' End Irwin UniBit-4 Step Drill MSRP: Now: $32.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock MSRP: Now: $135.99 Add to Cart Compare Quick view Details ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust MSRP: Now: $20.00 Add to Cart Compare Quick view Details ClampCo V-Band Clamp, 3.5in Turbo to Downpipe MSRP: Now: $22.00 Add to Cart Compare Quick view Details Wits' End Irwin UniBit-4 Step Drill MSRP: Now: $32.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust MSRP: Now: $20.00 Add to Cart Compare Quick view Details ClampCo V-Band Clamp, 3.5in Turbo to Downpipe MSRP: Now: $22.00 Add to Cart Compare Quick view Details Wits' End Irwin UniBit-4 Step Drill MSRP: Now: $32.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details ClampCo V-Band Clamp, 3.5in Turbo to Downpipe MSRP: Now: $22.00 Add to Cart Compare Quick view Details Wits' End Irwin UniBit-4 Step Drill MSRP: Now: $32.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Wits' End Irwin UniBit-4 Step Drill MSRP: Now: $32.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details TIAL TIAL MR Series Wastegate Spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details TIAL TIAL MR Series Wastegate Spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details TIAL TIAL MR Series Wastegate Spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details TIAL TIAL MR Series Wastegate Spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details TIAL TIAL MR Series Wastegate Spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo MSRP: Now: $26.00 Add to Cart Compare Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo MSRP: Now: $290.00 Add to Cart Compare Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Wits' End 80 Series 1FZ Super Charger Belt- DAYCO This is the aftermarket replacement for the serpentine drive belt for the Super Charger on the 80 Series 1FZ motors. Unfotunately Toyota decided to obsolete this drive belt and at the time all remaining stock were purchased. Those have since sold out... MSRP: Now: $32.00 Add to Cart Compare Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Wits' End Wits End Turbo Downpipe Blanket- Banana Hammock The downpipe is a critical component of the Wits' End Turbo system. The downpipe routes the flow of exhaust gas from the turbo and the wastegate and directs it to the exhaust. This piece always sees a lot of heat. The downpipe blanket does a great job at... MSRP: Now: $135.99 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view ClampCo V-Band Clamp, 3in. Downpipe to OEM Exhaust This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3" inside diameter clamp used to clamp down the downpipe's outlet flange to the OEM exhaust. ClampCo part # 99800-0382 MADE in USA MSRP: Now: $20.00 Add to Cart Compare Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view ClampCo V-Band Clamp, 3.5in Turbo to Downpipe This is the standard V-Band clamp used on the Wits' End Turbo for the 1FZ OBD2. This ClampCo clamp is for the 3.5" inside diameter clamp used to clamp down the turbo's exhaust flange and the downpipe's inlet flange. ClampCo part # 99828-0431 MADE in... MSRP: Now: $22.00 Add to Cart Compare Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Wits' End Irwin UniBit-4 Step Drill Irwin UnitBit #4 used for step drilling larger holes used for On-Board-Air applications and for drilling the AN bung for the Turbo Drain Fitting. Sizes Included: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" Made in USA MSRP: Now: $32.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view TIAL TIAL MR Series Wastegate Spring- Yellow Genuine TIAL MV-R wastegate spring- Yellow MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view TIAL TIAL MR Series Wastegate Spring- Black Genuine TIAL MV-R wastegate spring- Black MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view TIAL TIAL MR Series Wastegate Spring- Blue Genuine TIAL MV-R wastegate spring- Blue MSRP: Now: $8.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view TIAL TIAL MR Series Wastegate Spring- Natural Genuine TIAL MV-R wastegate spring- Natural MSRP: Now: $9.00 Add to Cart Compare Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view TIAL TIAL MR Series Wastegate Spring- White Genuine TIAL MV-R wastegate spring- White MSRP: Now: $8.00 Add to Cart Compare Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Wits' End Weld-in Fitting Kit- 10AN for 1FZ Turbo Although this weldable bung can be used on anything where you need a 10AN aluminum bung, technically this was put together for those wanting to add the turbo oil return port back to the upper oil pan of the 80 Series Land Cruiser with the 1FZ. This comes... MSRP: Now: $26.00 Add to Cart Compare Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
Quick view Wits' End Downpipe Blanket for the Wits' End 1FZ Turbo NOTE: This pre-order determines how many are produced and might not be a stocking item afterwards After a little bit of trial and error and a lot of road miles, there is finally a custom turbo Downpipe Blanket available for the Wits' End Turbo Kit... MSRP: Now: $290.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
