80 Series 1FZ Oil Pump Leak Kit

NOTE: JIS bits no longer included since we've had issues getting a consistent qty Notice that dirty, oily, goopy mess all over the front of your 1FZ block? Its one, or more, of three typical things: leaking distributor o-ring, leaking front engine seal...

Oil Drain Bolt Gasket

There are your standard Toyota drain plug gaskets that should be replaced with every oil change. Part no: 90430-12031 Fits: Toyota FJ Cruiser 2007-2014 Toyota Land Cruiser 1991 - 2020 Toyota Pickup 1990 - 1995 Toyota Sequoia 2001-2020 Toyota T100...

Toyota FIPG 103 Adhesive

TOYOTA OEM specified adhesive for the oil pan and camshaft housing. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings. OEM part # 00295-00103 • Assemble parts within 15...

80 Series 1FZ Valve Cover Leak Kit

This is the Valve Cover Leak Kit for the 80 Series Land Cruiser with the 1FZ motor. Other than the Oil Leak Kit, this is the next most common source of engine leaks. In order to complete this task you will need to remove the throttle body so a gasket is...

100 Series 2UZ Valve Cover Gasket Kit- PRE 08/2002

As more 100 Series Land Cruisers come of age, the need to take care of a leaking valve cover gasket only increases. This is the complete kit needed to do the valve cover kit for pre-08/2002 100 Series. For post-08/2002 trucks please go here: 100 Series...

80 Series 1FZ Complete Head Gasket Kit

Complete head gasket kit for the 1FZ which includes exhaust manifold hardware and oil cooler gaskets. If you need the head gasket poster to help identify parts you can get it here. Includes:• (1) GASKET KIT, CYLINDER VALVE GRIND (04112-66036)•...

80 Series 1FZ Fuel Injection Service Kit

Complete gasket and o-ring kit needed when you need to service or replace the fuel injectors on your 80 Series 1FZ Land Cruiser. • (6) Injector insulator (23291-41010)• (6) Grommet (90480-13005)• (6) O-Ring (90301-07001)• (1) Intake...

80 Series 1FZ Catalytic Converter Gaskets

Although its not crazy common, it does happen that you can get an exhaust leak in between the catalytic converters. Or if you find yourself needing to remove/replace the cats then its a good idea to change this gasket. If you are doing this gasket then...

100 Series 2UZ Valve Cover Gasket Kit- POST 08/2002

As more 100 Series Land Cruisers come of age, the need to take care of a leaking valve cover gasket only increases. This is the complete kit needed to do the valve cover kit for post-08/2002 100 Series. For pre- 08/2002 >.  If you are looking...

80 Series 1FZ Complete Fuel Pump Kit

As our 80 Series age there are certain maintenance items that are completely overlooked only until AFTER they fail. Having a fuel pump fail is NOT crazy common but it does occur, especially with higher milage trucks. But what it more common is having the...

Gasket 15785-66010, oil cooler or water pipe

This OEM gasket is used for the heater return pipe which sits on the thermostat housing on the 1FZ and you need only one. This is the SAME gasket used in the oil cooler kit and you would need two. Part number: 15785-66010 MADE in JAPAN

1HD-T Injector Seal Kit

Injector nozzle seal kit for the 80 series Land Cruiser with the 1HD-T diesel engine. These are the copper nozzle seats that are used from 1/90 to 8/92. Not for use in the 1HZ or any gas engine application. Contains:• (6) 96711-24019 o-ring•...

100 Series 2UZ Valve Cover Bolt Set

As more 100 Series Land Cruisers come of age, the need to take care of a leaking valve cover gasket only increases. This is the complete set of replacement bolts. If you are looking to get the entire kit for your 100 Series 2UZ Land Cruiser then try 100...