null

Electrical Supplies

  • OEM Wire Harness Tape (WHT-1)

    OEM Wire Harness Tape

    This is the OEM wire harness tape used on the Toyota Land Cruiser. This is the ideal wrap tape for under the hood. For harness tape that runs along the inside of body panels its preferred to use TESSA tape for it helps reduce noise during vibration...

    $38.45
    Add to Cart
  • OEM Switch Bulb (IPL-3) 84999-10420

    OEM Switch Bulb

    Although this bulb fits many Toyota models, this fits the 80 Series Land Cruiser in *some* of the switches. Best to look up your exact application to see if it fits. Part number: 84999-10420 MADE in JAPAN  

    $10.30
    Add to Cart
  • Switch Bulb, 14V 0.84W (IPL-2) 84999-10320

    Switch Bulb, 14V 0.84W

    Although this bulb fits many Toyota models, this fits the 80 Series Land Cruiser in *some* of the switches. Best to look up your exact application to see if it fits. Part number: 84999-10320 MADE in JAPAN  

    $10.10
    Add to Cart
  • 80 Series Instrument Panel Light (IPL-1)

    Combination Meter Light- 80 and 100 Series

    Have a light out on your dash?  Here is your Combination Meter Bulb NO.1, 12V 1.4W, w/socket. In total your truck takes about 11 but these are sold individually. Part no: 83120-60020 NOTE: These are NOT for the gear position lights Also...

    $5.60
    Add to Cart
  • 80 Series Harness Clip-Core Support (CLIP-1)

    80 Series Harness Clip-Core Support

    Ever notice those three plastic nubs on the radiator core support that are just in front of the radiator? You know those plastic protrusions you have held on with carefully placed zip-ties...or are just missing altogether? Well these are the harness...

    $7.05
    Add to Cart
  • OEM Toyota Grease Kit- Plastic Geared Electric Motors (TGK-1)

    OEM Toyota Grease Kit- Geared Electric Motors

    Although spec'd for Lexus steering shaft lubrication its formulation is near identical to the grease used internally on the plastic gears found on the electric seats in Land Cruisers (and likely other Toyota vehicles). When completely rebuilding the seat...

    $19.00
    Add to Cart
  • Body Grease- Molykote 102 (BGM-102)

    Body Grease- Molykote 102

    This is the Toyota specific grease used in electrical motors on the Land Cruisers. Typical applications would be the windshield motors and the diff e-lock motors that commonly need to be rebuilt. One bottle is easily enough for two motor's worth of...

    $67.10
    Add to Cart
  • Anderson SB175 Environmental Boot- Load Side (AEB-175L) 
*Note that SOURCE is indicated for photo only

    Anderson SB175 Environmental Boot- Load Side

    These Anderson Environmental Boots are keyed as either SOURCE or LOAD sides. Use SOURCE on the cable side that is directly connected to your battery or power source. Use LOAD one the cable side of the device/accessory that you are looking to plug in to...

    $17.00
    View Details
  • Anderson SB50 Environmental Boot- Load Side (AEB-50L)

    Anderson SB50 Environmental Boot- Load Side

    These Anderson Environmental Boots are keyed as either SOURCE or LOAD sides. Use SOURCE on the cable side that is directly connected to your battery or power source. Use LOAD one the cable side of the device/accessory that you are looking to plug in to...

    $7.00
    View Details
  • Fuel Injector Connector Housing (FIC-1)

    Fuel Injector Connector Housing

    Original Toyota Sumitomo 2 Way TS Plug Housing for Denso Injectors. Connector ONLY. Terminals not included. These connectors are ALWAYS brittle and tend to break after 20+ years on our trucks. They seem to want to break at the most inopportune time. You...

    $10.60
    Add to Cart
  • Anderson SB50 Environmental Boot- Source Side (AEB-50S)

    Anderson SB50 Environmental Boot- Source Side

    These Anderson Environmental Boots are keyed as either SOURCE or LOAD sides. Use SOURCE on the cable side that is directly connected to your battery or power source. Use LOAD one the cable side of the device/accessory that you are looking to plug in to...

    $5.00
    Add to Cart
  • Anderson SB50 Flush Mounting Bracket (AMK-4)

    Anderson SB50 Flush Mounting Bracket

    The Flush Mounting Bracket is ideal for the perfectionist. This bracket was developed to have a clean install for the source side of the Anderson SB50 connector. A notch is needed to be cut into the mounting material to get the bracket front face mounted...

    $20.00
    Add to Cart
  • Fusible Link for 80 Series Land Cruiser (FLK-1)

    Fusible Link for 80 Series Land Cruiser

    Replacement fusible link for all US 3FE and 1FZ 80 Series Land Cruisers. Recommended to get two, one to replace what you have and one for a spare. This is an OEM original part. Part no. 90982-08264 Made in Japan

    $21.15
    Add to Cart
  • Anderson SB50 Connector Kit (AMK-3)

    Anderson SB50 Connector Kit

    Anderson Powerpole SB50 connectors are a convenient and secure quick disconnect for 12v systems up to 120 amps. A connector "kit" includes all the parts needed for a single connection. Contains:• (2) Anderson SB50 gray connectors• (4) Metal...

    $7.50
    Add to Cart
  • Anderson SB50 Flush Mounting Bracket Kit (AMK-1)

    Anderson SB50 Flush Mounting Bracket Kit

    The Flush Mounting Bracket is ideal for the perfectionist. This bracket was developed to have a clean install for the source side of the Anderson SB50 connector. A notch is needed to be cut into the mounting material to get the bracket front face mounted...

    $21.00
    Add to Cart
  • 1N4001 diode

    80 Series Auto-Up Mod Diode

    If your 80 Series Land Cruiser or LX450 has power windows then this mod is for you. Currently your driver's side window has a feature known as Auto-Down. This means that not only can you control the window's movement up and down but with one deliberate...

    $1.50
    Add to Cart