Air Coupler and SB50 Bracket KIT

Product Description

The Air Coupler and SB50 Bracket KIT is designed for mounting both power and air connections in locations where you need them. There is a second ring that protects the front edge of the air coupler and prevents the coupler from being damaged when it is stepped on or has something heavy placed in it. The SB50 slot is designed for the Anderson SB50 connector WITH the environmental boot only. This is perfect for those mounting on a bumper that is sometimes used as a step.  This Air Coupler and SB50 Bracket is made from 1/8" thick 316 Stainless Steel and then is powder coated black.

This Air Coupler and SB50 Bracket KIT has everything else you need for the last section of your On Board Air install. This is NOT the cheap Chinese stuff you can easily pick up at Harbor Freight. These are all top-of-the-line fittings. This KIT includes the coupler, the bulkhead, the air hose fittings, the angled bracket, the hardware and 10ft of black nylon tubing for the air side. For the power side it includes the Anderson SB50 connector, terminal pins and environmental boot. Simply pick the spot(s) on either inside or outside of your vehicle, drill two holes and tighten with the supplied hardware. Then just connect the 3/8" tubing to your air source and you are good to go. Since the bracket and hardware is all 316 stainless steel you are safe to mount this in any environment including salt water. The Anderson connector WILL require proper termination for the positive and negative wires to the supplied terminal pins.

Included:
• Air Coupler and SB50 Bracket
• 316 Stainless mounting hardware
• Parker Push to Connect Air Hose Multiple Interchange Quick Coupling
• Parker Pipe Fittings Anchor Connector
• Parker 1/4" NPT to 3/8" tube fitting
• Norgren Nylon 11, 3/8" tubing-black, 10ft
• Anderson SB50 connector with terminal pins
• Anderson SB50 environmental boot

MADE in USA