• Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)
  • Quarter Panel Mount, 80 Series- right (QPM-1)

Quarter Panel Mount, 80 Series- right

$265.00
Quantity:
SKU: QPM-1
Weight: 18.20 LBS
Expected production start date is Jan 2nd 2018

Product Description

NOTE: These will be going back into production BUT NOT until end of Dec or early Jan. All orders are considered pre-orders for the next small run.

In the back of the 80 Series Land Cruiser there is a large void that seemingly does nothing but taunt you and literally collect dust. But you wouldn't know this because its hidden behind a large plastic panel. If you remove that panel you will see just how much space there is to work with. The Wits' End Quarter Panel Mount gives you the means to make that space usable. This mount maximizes every usable inch of space while still being able to easily install. There are other attempts at making mounts for this area but they are all painfully small or are too myopic by only caring about large woofers.

This mount is 21' x 32" of usable space and has two shelves for mounting heavy components. The mount utilizes existing body panel holes while still allowing the use of the plastic cargo panel. All hardware will be supplied and if you are planning on mounting an ARB single or twin compressor or almost any Viair compressor, then you are in luck because the mounting holes will already be in place. Mounting anything from power inverters, amplifiers, solar charge controllers, fuse panels, relays, wiring, switches, air compressors or anything else that comes to mind can now be possible AND keeping it out of sight from prying eyes.

Included is a 3/8" birch plywood panel that runs the length of the panel that is attached by supplied hardware and not only classes the mounting bracket up but it also gives an easily removable panel to pre-wire most electrical components. Instead of working around a big piece of steal, instead you can layout everything on the plywood panel and use simple wood screws for the small/light components to make life easier. This wood panel also adds electrical isolation if needed. Anything heavy can be mounting onto the steel THRU the wood for greater stability.

FEATURES:
• 16 Gauge die-cut steel and CNC formed
• Attaching hardware is pre-installed where applicable
• Standard Wits' End black textured powder coating
• Mounting holes for VIAIR and ARB compressors
• Mounting hardware included
• 3/8" birch plywood insert CNC cut
• Maximizes all usable space

MADE in USA latest.gif