York 210 Solutions

  • 1FZ 1/2in. AN pass-thru fitting York 1/2in. AN pass-thru fitting (YRK-9)

    1FZ 1/2in. AN pass-thru fitting

    This is the second side of the fittings needed for the suction side hose on the York OBA install on the 1FZ motors found on the 80 Series Land Cruisers. There is a small hole that needs to be drilled into the air filter canister that allows this fitting...

    $31.00
    Add to Cart
  • 2.5 Gallon Air Tank Kit What comes in the OBA-25 kit along with the air tank.

    2.5 Gallon Air Tank Kit

    One major component of a dedicated On-Board-Air system is the air tank. The air tank stores compressed air at the ready for air up tires or operating air tools. Air tools are nearly impossible to use without the use of a compressed air tank. The Wits'...

    $150.00
    Add to Cart
  • 80 Series 3-Groove Water Pump Pulley 80 Series 3-Groove Water Pump Pulley (WPP-1)

    80 Series 3-Groove Water Pump Pulley

    Note: This may fit other applications other than the 1FZ but its intended application is the 1FZ. Any usage outside of the 1FZ for the York OBA is outside of the scope of the design and there is no warranty. On the 1FZ powered 80 Series Land Cruisers...

    $165.00
  • 80 Series Air Manifold and Mount KIT 80 Series Air Manifold and Mount KIT (AMM-1)

    80 Series Air Manifold and Mount KIT

    The 80 Series Air Manifold KIT is another piece of the On Board Air puzzle. This Air Manifold KIT comes with a custom bracket that mounts to the passenger side inner fender beside the air canister. The bracket holds the manifold which is the attachment...

    $225.00
    Add to Cart
  • 80 Series Filter to Air Manifold hose KIT 80 Series Filter to Air Manifold hose KIT (YRK-13)

    80 Series Filter to Air Manifold hose KIT

    One of the pressurized hoses needed for installing the York OBA system onto your 80 Series is the compression hose going from the coelescing filter to the air manifold on the 80 Series with the 1FZ. This KIT has everything you need to connect the filter...

    $55.00
    Add to Cart
  • 80 Series OBA Coalescing Filter & Mount Kit 80 Series OBA Coalescing Filter & Mount Kit (OBA-2KIT) shown with 3/8" NPT fittings (not included)

    80 Series OBA Coalescing Filter & Mount Kit

    When running a York On-Board-Air (OBA) system its always advisable to run a coalescing filter inline from the York's discharge line. The reason for this is to separate both the oil (coming from the York) and the condensation (created from the...

    $125.00
    Add to Cart
  • 80 series York compressor mounting bracket

    80 series York compressor mounting bracket

    For anyone considering mounting a York 209 or 210 onto your 80 Series Land Cruiser, you first need this bracket. This 1/4" zinc plated steel bracket is designed to mount on the 1FZ's aluminum head and places the York's fittings putting straight up. This...

    $210.00
  • 80 Series York discharge hose KIT

    80 Series York discharge hose KIT

    Getting the York 210 mounted to your 1FZ Land Cruiser is only half the battle. Next you have to plumb it. The suction line is the first component but then you need the discharge hose kit next to get you from the York to the coalescing filter. This hose...

    $70.00
    Add to Cart
  • 80 Series York suction hose KIT 80 Series York suction hose (YRK-10)

    80 Series York suction hose KIT

    When you finally get the York 210 installed onto your 1FZ powered 80 Series Land Cruiser, you will need to get fresh air from somewhere to supply for the suction side. This KIT has everything you need to get the hose installed. All you need to do is...

    $70.00
    Add to Cart
  • Complete 80 Series Rear Air Tank Solution Complete 80 Series Rear Air Tank Solution (RATS-2)

    Complete 80 Series Rear Air Tank Solution

    This is the complete air tank solution for the rear of the 80 Series Land Cruiser. This solution includes everything you need to mount an air tank under the rear of the truck (requires removal of spare tire). The intent of this kit is to be as...

    $350.00
  • York 90deg to 1/2in. AN fitting adaptor York 90deg to 1/2in. AN fitting adaptor (YRK-8) mounted on the York 210 flange fitting

    York 90deg to 1/2in. AN fitting adaptor

    *NOTE: product shipping 1/15 One of the biggest challenges, after finding a solution for mounting a York 210 compressor to your vehicle, is to find a workable solution to making hoses for the fresh air suction line and the high-pressure discharge line...

    $35.00
    Add to Cart
  • York On-Board-Air Bracket and Pulley Kit York On-Board-Air Bracket and Pulley Kit (YRK-1)

    York On-Board-Air Bracket and Pulley Kit

    FAQs: York On Board Air Kit Since starting Wits' End last May, the number one thing I keep getting asked to make (other than the battery disconnect, the D-Pillar mount, the second row bug screens, etc etc) is the York Bracket and Pulley Kit. The York...

    $420.00
    Pre-Order Now