NOTE: Depending on the year of your Land Cruiser, you MIGHT need to grind down a small section of the brake hose's bracket in order to fit properly.
Initially I wasn’t going to bother making these but I was really surprised how often I was asked to make them. There is another vendor making these but the feedback was folks were looking for OEM hardware. I worked with my hydraulic hose shop, same that makes my turbo oil hoses, and we made up a batch to see if they fit the bill for what folks are looking for.
Complete stainless steel DOT brake hose kit for the 80 Series Land Cruiser (93-97) with the 4" lift. Although these are intended for the 4" lift they can still be used for the 2-3" lifts as well. Stainless steel brake hoses will not bubble/expand the way standard brake hoses tend to do over time. Stainless steel brake hoses will stand up to more abuse over standard rubber. The main downside I've run into with stainless brake hoses is losing the ability to pinch the hose shut with vice grips when the hose has been severed while off-road. For those looking for just standard OEM brake hoses for a 4" lift you can also use these: 80 Series OEM Brake Hose Kit for 2-4in Lifts
• (2) DOT stainless steel front caliper hoses (L/R)
• (2) DOT stainless steel rear caliper hoses (L/R)
• (3) DOT stainless steel frame hoses
• (4) OEM Banjo bolt (union)- 90401-10015
• (8) OEM Pressure gasket- 90430-10074
• (2) OEM Brake hose clip- 90468-08044
• (5) OEM Brake hose clip- 90468-08034