The LANDTANK Caster plates* are designed to rotate the axle on it's center similar to OEM specification. These plates are necessary for the popular 4" lift and to get your caster readings to within required specs.
*Plates require OEM bushings. If you have exceeded the adjustment of the castor correction bushings, or your existing stock bushings are worn out, replace OEM bushings at the same time. (The use of a right angle drill is required for installation, please let your shop know. If attempting a DIY project any major tool rental will have this tool available for a nominal fee.)
Noted benefits are: Axle position remains constant allowing the tire position to travel with in the stock wheel well. Spring perches are closer aligned, providing better support, eliminating any interference. No grinding required to control arms or tie rods.
Disclaimer: This modification is intended for offroad use only and the user accepts all responsibility and risks from performing this change.
• 4" Caster Plates Installation Instructions (last modified May. 27, 2016)
MADE in USA