One major component of a dedicated On-Board-Air system is the air tank. The air tank stores compressed air at the ready for air up tires or operating air tools. Air tools are nearly impossible to use without the use of a compressed air tank.
The Wits' End 2.5 Gallon Air Tank Kit is a 200p.s.i. tank perfect for your On-Board-Air (OBA) setup. What makes this kit unique are the components sourced to make this tank complete and as plug-n-play as possible. Most of the fittings have been sourced through Norgren® and have been carefully selected to make sure your installation is worry-free and won't require time and energy to figure out how to make your OBA setup work.
On-Board-Air should be high on the list of every off-roading or overlanding equipped truck. There are many ways to get air on your truck including CO2, York engine mounted compressor or electric compressor. CO2 comes with its own tank but for those looking to a belt driven compressor or electric compressor, there is often times a need for stored air. Typically the compressor is not enough due to CFM or duty cycle of the compressor or because of speed.
(1) 2.5G 200psi air tank
(1) 1/4" NPT to 3/8" tube straight Pneufit Push-In fitting
(1) 1/4" NPT to 3/8" tube 90º Pneufit Push-In fitting
(25ft) 3/8" black nylon 11 tube, UL -94HB flame retardant rating, heat and light stabilized
(2) 1/4" NPT plugs
(1) 1/4" NPT drain valve w/stainless tether
(1) 1/4" NPT safety valve
(1) Delrin® 5" x 3/8" spacer
(1) Nylon tubing cutter
(1) tube of thread sealant
• 200 PSI Rated
• (6) 1/4" NPT Ports
• Air Tank Temperature Rating: -40°F ~ +176°F
• Dimensions: 23.5"L x 6"W x 7.5"H
• Net Weight: 14.05 lbs.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.